Fixed installation method of wiring terminal block

Abstract: This article introduces the fixed installation method of wiring terminals for learning reference

Fixed installation method

1. Guide rail type terminal blocks: They can be fixed on the track and adjusted in position. Usually, these terminal blocks are combined, and there is no limit on the number of P. Common fixed tracks are 35mm wide and 25mm wide. For example: NC T4 and NC T10 from Xiangli Industry

2. Panel type wiring terminals: mainly fixed on the panel or machine board of the distribution board. For example, the TB series fence type terminal strip of Xiangli Industry; This type of terminal is often equipped with fixing holes for fixing with locking screws. This type of terminal is fixed, but there are also combination terminals.

3. Pcb terminal blocks: commonly known as PCB terminal blocks, they are lightweight and suitable for applications in low current and voltage environments. They are often classified in detail based on pitch size and outlet angle. This type is mainly applied to consumer or commercial electronic products. Also known as plug-in terminal blocks. Combination or single piece versions are common.

4. Modular terminal blocks: Use PCB terminal blocks in modules such as Diode, Relay, AC-DC conversion, DC-AC conversion, PLC interface, overvoltage protection, program control, or signal conversion. It may be installed on a printed circuit board or independently integrated.